- CISCO SPA 112 ACCEPTING NUMBER PRESS AS UNHOOK UPGRADE
- CISCO SPA 112 ACCEPTING NUMBER PRESS AS UNHOOK REGISTRATION
- CISCO SPA 112 ACCEPTING NUMBER PRESS AS UNHOOK SOFTWARE
Get calling party number from Remote-Party-ID header SIP numbers can directly be linked to GSM numbers or DTMF dialling is possible with or without speed dialling lists in both directions.ġ.5.
CISCO SPA 112 ACCEPTING NUMBER PRESS AS UNHOOK REGISTRATION
The GSM PBX provides facilities for SIP DID registration or multiplexed single user registrations at a SIP provider. The number of successfully sent short messages via Telnet is shown in the statistics. Because of the high trace traffic that reduces the record history, cell info should only be requested, if necessary for troubleshooting. If Telnet is used for internet access via GPRS, cell info can decrease data throughput a bit. In earlier releases, cell information was not available if Telnet was activated. GSM cell info available in multiplexer mode Call setups in direction to GSM are accepted from both IP addresses.ġ.2. Call setups to the PBXs are sent to the primary peer IP address except if the connection to this address is not given but the connection to the second peer IP address is present.
CISCO SPA 112 ACCEPTING NUMBER PRESS AS UNHOOK SOFTWARE
The evaluating of the received Via header in SIP is enhanced now for proper working with proxies.ĪS55X Release notes - Firmware and Service Software 3.03Ī secondary peer IP address can be defined now for a backup PBX. In some cases with proxies, the SIP-response from the AS55X seems to come to nothing. If this recoding should cause problems, it can be deactivated by resetting the unnamed bit 4. These numbers are now by default converted to 0123 respectively 00123. Sometimes the AS55X is getting called or calling party numbers like +0123 or +00123 which are obviously wrong coded. The DialCommand server for working with SIP on the wired domain of the AS55X is implemented. Please read further information in the help context of the configuration. With updating to firmware 3.01, the test licence is automatically granted.
CISCO SPA 112 ACCEPTING NUMBER PRESS AS UNHOOK UPGRADE
The received upgrade code has to be copied into the dedicated field and then applied.Įvery AS55X gets a test licence for maximum device features for a duration of four weeks. This key must be sent to the manufacturer for generation an upgrade code.
![cisco spa 112 accepting number press as unhook cisco spa 112 accepting number press as unhook](https://www.helpowl.com/manualimages/9/r/cisco-spa112-administration-guide-ed16987_7_cbab.png)
The installation window 'Enter upgrade code' generates an upgrade key. Upgrading for new features is now possible with an upgrade code. This function can be suppressed by setting of unnamed bit 35.ĪS55X Release notes - Firmware and Service Software 3.01 If the LAN interface is a DHCP client, DHCP requests are additionally used as connection check to the network. Suppress DHCP request as connection check This initially present function was lost with the firmware release 1.05 and is reactivated now.Ģ.2.
![cisco spa 112 accepting number press as unhook cisco spa 112 accepting number press as unhook](https://community.cisco.com/kxiwq67737/attachments/kxiwq67737/5861-discussions-ata-gateway-accessories/8155/4/sip2.png)
Fixed link of ISDN B-channel and GSM channel failed Some PBXes need this prefix in order to manage call back properly.Ģ.1. Additionally add prefix '0' to CLIP to wired interface Physical LAN settings can now be set via configuration platform and the actual used or negotiated operation mode can be watched with 'View LAN status'.ġ.2. LAN speed and simplex/duplex settings and watching
![cisco spa 112 accepting number press as unhook cisco spa 112 accepting number press as unhook](https://community.cisco.com/kxiwq67737/attachments/kxiwq67737/5861-discussions-ata-gateway-accessories/8155/3/user1_0.png)
This firmware can be used for all AS55X hardware versions.ġ.1. The switching between ISDN and SIP can be done with the service software. The Firmware 3.00 is the junction of ISDN release 1.11 and SIP release 2.29. AS55X Release notes - Firmware and Service Software 3.00